Product Code:SAE AMS3653
Title:Tubing, Electrical Insulation Standard Wall, Extruded Polytetrafluroethylene (Ptfe)
Issuing Committee:Ams P Polymeric Materials Committee
Scope: This specification covers extruded polytetrafluoroethylene (PTFE) in the form of flexible tubing. This tubing has been used typically as electrical insulating sheath up to 260 degrees C (500 degrees F), but usage is not limited to such applications.
Rationale: This specification covers extruded polytetrafluoroethylene (PTFE) in the form of flexible tubing. This tubing has been used typically as electrical insulating sheath up to 260 degrees C (500 degrees F), but usage is not limited to such applications.
【英文标准名称】:Animalandvegetablefatsandoils-Determinationofunsaponifiablematter-Methodusingdiethyletherextraction
【原文标准名称】:动植物油脂不皂化物测定乙醚提取法
【标准号】:ISO3596-2000
【标准状态】:现行
【国别】:国际
【发布日期】:2000-07
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC34
【标准类型】:()
【标准水平】:()
【中文主题词】:不可皂化物质;食品;萃取分析法;含量测定;脂肪;动物油;二乙醚;动物脂肪;农产品;植物油;油;定义;化学分析和试验;测定;蜡;萃取;植物脂肪
【英文主题词】:Agriculturalproducts;Animalfats;Animaloils;Chemicalanalysisandtesting;Definitions;Determination;Determinationofcontent;Determinationprocedures;Diethylether;Extraction;Extractionmethodsofanalysis;Fats;Foodproducts;Oils;Unsaponifiablematter;Vegetablefats;Vegetableoils;Waxes
【摘要】:ThisInternationalStandardspecifiesamethodusingdiethyletherextractionforthedeterminationoftheunsaponifiablemattercontentofanimalandvegetablefatsandoils.Thismethodisnotapplicabletowaxesand,moreover,givesapproximateresultswithcertainfatsofhighunsaponifiablemattercontent,forexamplewithfatsderivedfrommarineanimals.AmethodgiveninISO18609maybeusedwhenclimaticconditions,orregulations,donotpermittheuseofdiethylether.
【中国标准分类号】:X14
【国际标准分类号】:67_200_10
【页数】:8P.;A4
【正文语种】:英语
基本信息
标准名称: | 镁合金铸件X射线实时成像检测方法 |
英文名称: | X-Ray real-time radioscopic testing method for magnesium alloy castings |
中标分类: |
冶金 >>
金属理化性能试验方法 >>
金属理化性能试验方法综合 |
ICS分类: |
机械制造 >>
表面处理和涂覆 >>
表面处理
|
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2009-04-23 |
实施日期: | 2009-09-01 |
首发日期: | 2009-04-15 |
作废日期: | |
主管部门: | 中国有色金属工业协会 |
提出单位: | 中国有色金属工业协会 |
归口单位: | 全国有色金属标准化技术委员会 |
起草单位: | 国家镁合金材料工程技术研究中心、重庆镁业科技股份有限公司、重庆博奥镁业有限公司等 |
起草人: | 潘复生、张静、章宗和、向冬霞、胡耀波、廖正陶、林楚鹤、郭进 |
出版社: | 中国标准出版社 |
出版日期: | 2009-07-01 |
页数: | 8页 |
计划单号: | 20073464-T-610 |
书号: | 155066·1-37616 |
适用范围
本标准规定了镁合金铸件X 射线实时成像无损检测方法。但未规定铸件内部不均匀性的可接受准则。
本标准适用于对镁合金铸件内部不均匀性的种类和严重程度进行实时无损检测。
前言
没有内容
目录
没有内容
引用标准
下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T3323-2005 金属熔化焊焊接接头射线照相
GB/T19293-2003 对接焊缝X 射线实时成像检测法
GB/T19943-2005 无损检测 金属材料X 和伽玛射线 照相检测 基本规则
JB/T7902 无损检测 射线照相检测用线型像质计
所属分类: 冶金 金属理化性能试验方法 金属理化性能试验方法综合 机械制造 表面处理和涂覆 表面处理